| |
Foam Sketch Model
Project Construction Kit
- (1)
piece of 7# cu. ft. rigid urethane foam, 1/2” X
3” X
5”
- (1) piece of transparent Plexiglas 1/8” thick x
1 ½” x
2”, with 1/8” radius corners, back painted
with acrylic lacquer to PPG Code #4507
Display Box Construction Kit
- (1) sheet of Baltic Birch plywood, 12” X 24”
x 1⁄4” (6mm) thick
- (1) sheet of general purpose acrylic (plexiglas), 12”
X 24” X 1/8”
- (1) 4 ounce squeeze bottle of Titebond® Woodworkers
Glue (“yellow glue”)
- (1) 4 ounce container of Weld-On 3 Acrylic Cement (cannot
be shipped by air)
- (1) pair of 1” diameter laser-cut acrylic circles
- (1) 1” diameter Irwin Speedbor drill bit
Vessel/Teapot Casting
Kit
-
(2) blocks 7# urethane foam, 12” X 12” X
4” thick
-
1 quart kit TC 808 (contains 32 oz. of TC-808A and
32 oz. of TC-808B)
(1) 8 ounce bottle kit Devcon 5-Minute Epoxy
- (1) palette knife
- (1) roll 2” wide double-stick carpet tape (cloth
type)
- (1) Dozen 32 ounce polyethylene mixing cups (graduated)
Vessel Finishing And Paint Kit
- (1) spray can of flat black LACQUER for guide coating
- 1 pint Evercoat Metal Glaze polyester surfacing putty
with 1 tube catalyst
- 1 quart PPG DCU 2042 Catalyzing Urethane Clearcoat
- ½ pint PPG DCX 61 Urethane Catalyst
- 1 pint PPG DT 870 Urethane Reducer
- 1 pint Evercoat Metalglaze Polyester Finishing Putty
Height Gauge And Angle Block
Kit
Model Polishing Kit
|