Foam Modeling And Clay Kit

• (2) Blocks 10 pound/cu. ft. rigid urethane foam, 12” X 12” X 4”

• Styrene .060 x 12” x 24”

• 20 pounds of Chavant J-525 industrial styling clay

• (1) Sheet spring steel shim stock 4” X 12” X .005”

• (1) Sheet spring steel shim stock 4” X 12” X .007”

• (1) Sheet spring steel shim stock 2” X 6” X .015”

Angle Block and Height Gauge Kit

• (1) Set of cut parts for height gauge (3/4” Baltic Birch plywood)

• (1) Set of cut parts for angle block (3/4” Baltic Birch plywood)

Mold and Part Layup and Finish Painting Kit

• 3 Yards 9 ounce knitted double-bias Fiberglass Cloth, 50” wide

• 2 Pounds (1 Quart) TC-1568A Epoxy surface coat in tin paint can, and ¼ pound TC-1568B Epoxy hardener in ½ pint tin paint can

• 4 Pounds (2 Quarts) TC-1604A Epoxy laminating resin in 1 quart tin paint cans, and 1/2 pound TC-1604B Epoxy hardener in 1 pint tin paint can

• 8 Ounces Tooling Foam part A, in enclosable plastic cup, sealed with tape to prevent leakage

• 2.6 Ounces Tooling Foam part B, in enclosable plastic cup, sealed with tape to prevent leakage

• 1 Quart PVA (Polyvinyl Alcohol)

• Assortment of EVA (closed cell) rubber small sanding blocks (made by Dura-Block)

• 1 Quart. Polyester primer-surfacer with catalyst

• 1 Pint. Metal Glaze polyester spot putty, and catalyst in tube

• 1 Spray can of flat black LACQUER for guide coating

Model Polishing Kit

• (1) recycled cotton diaper

• (1) 4 ounce bottle 3M Perfect-It III rubbing compound

• (1) 4 ounce squeeze bottle 3M Perfect-It III machine glaze

• (1) 4 ounce squeeze bottle Turtle Wax